CINTROPUR
NW 400 1 1/2″
Article-Nr.: FWCCNW400
Water filter for semi-industrial use. Flow rate 12 m³/h.
Related products
Supplies
Replacement sleeves for filter NW 400. Supplied in packs of 5 units. Fineness available from 1 to 300 µm. (The item number corresponds to the fineness 25 µm).
The cartridge is made of a single layer of AISI 316L stainless steel with a fineness of 50µm or 90µm, with a cup and a vane.
The filter screen is woven in an S-shape with vertically weft threads.
The cartridge is made of a single silver bacteriostatic layer of AISI 316L stainless steel with a fineness of 50µm or 90µm, with a cup and a vane.
The filter screen is woven in an S-shape with vertically weft threads.
Parts
Same stainless steel wall bracket for the 3 semi-industrial filters.
Measures the operating pressure of the filter. Only for the semi-industrial heads NW280, NW340, NW400 and for the industrial heads NW500, NW650, NW800.
Identical head for the semi-industrials filters. Supplied as standard with 2 nuts for the wall bracket. 2" standard thread on inlet and outlet.
Set of 2 couplings. Each set includes 3 pieces: nut, connector and o'ring.
Optimum sealing joint for the heads of the filters NW 280-340-400.
Optimum sealing joint for the heads of the semi-industrial filters.
Provides a long-lasting and ideal lubrication for all O-rings and threads of all CINTROPUR filters. Approved for food use. Content: 20 g.
Transparent bowl for a permanent visual control of the filter screen congestion. Supplied as standard equipped with an adapter and a ball valve.
Dismantling key for semi-industrial filter bowls.
To be fixed on the top of the filter sleeve support. It generates the cyclonic effect of the incoming water flow.
Cylindrical sleeve support. Reversible way for the mounting of the vane and the cover.
Ensures a perfect sealing of the sleeve on the filter support.
Allows the removal under pressure of dirt deposits created by the cyclonic effect of the vane. Supplied with a flat fibre gasket. The ½" valve can only be tightened by hand.
M10 thread, supplied with o’ring. It is suitable for all Cintropur filters (except the SL range).
Connector for the NW280-340-400. 2 o'rings included.