Replacement sleeves for the old and new industrial filters. Supplied in packs of 5 units. Fineness available from 1 to 300 µm. (The item number corresponds to the fineness 25 µm).
Same stainless steel wall bracket for the 3 new industrial filters.
Measures the operating pressure of the filter. Only for the semi-industrial heads NW280, NW340, NW400 and for the industrial heads NW500, NW650, NW800.
Identical model on NW 500 and NW 650 filters. Supplied as standard with the 2 nuts for holding the wall bracket in place. Non-standard inlet and outlet threads (M75 x 2.8) requiring the installation of original fittings CINTROPUR.
Set of 2 loose flanges. Ideal for a simple and effective sealing of the connection of the NW 650 filter to the water pipe. Supplied with 2 collars (M76 thread x 2.8) and 2 o’rings.
Sealing element for the 2 ½" loose flanges. Supplied by unit.
Sealing joint to be placed between the head and the 2” connection or the flange collar 2 ½".
Sealing joint to be placed between the head and the connection of the industrial filters.
Provides a long-lasting and ideal lubrication for all O-rings and threads of all CINTROPUR filters. Approved for food use. Content: 20 g.
Transparent bowl for a permanent visual control of the filter screen congestion.
If the water to be treated is permanently exposed to the sun's UV rays, a black bowl is recommended as a protection against the algae growth.
Dismantling key for industrial filter bowls.
To be fixed on the filter sleeve support. It generates the cyclonic effect of the incoming water flow.
Cylindrical sleeve support. Reversible direction. Equipped with a thread in the centre of the support for fixing the vane and the cap.
Ensures a perfect sealing of the sleeve on the industrial filter support.
Adapter for a perfect sealing supplied with 2 o'rings and clips for industrial filters NW 500 + 650 + 800.
Transparent bowl for a permanent visual control of the filter screen congestion. Supplied as standard equipped with an adapter and a ball valve.
M10 thread, supplied with o’ring. It is suitable for all Cintropur filters (except the SL range).
Allows the removal under pressure of dirt deposits created by the cyclonic effect of the vane. Supplied with a flat fibre gasket. The ¾" valve can only be tightened by hand.